Construction Site Security Camera Hire QLD: Rental And Lease Options

Poles and Holes hires construction site security cameras across Queensland, from a single camera on a residential slab to a multi-camera setup on a commercial site. Rental and lease both mean the same thing here: a weekly rate per camera with the mount, power, connectivity, install and removal included. We deliver from our Capalaba depot to Brisbane, Logan, Ipswich, Redlands, Moreton Bay and the Gold Coast.

Construction sites get hit in the quiet hours, and a construction site security camera keeps watch overnight without a roster, which is why most Queensland builders hire one rather than buy.

What construction site security camera hire includes

Construction site security camera hire from Poles and Holes includes the camera, the mounting hardware, the power source, the connectivity, delivery, installation by our crew and removal at the end. You do not buy hardware, book a separate installer or arrange a data plan. The camera goes up when work starts and comes down when the build finishes.

  • The camera and its weatherproof housing
  • The mount: a fence post, an existing power pole, or a dedicated camera pole where the site has neither
  • Power, either mains drawn from a site pole or a self-contained solar panel and battery
  • 4G connectivity with the data SIM inside the rate
  • Footage access from your phone
  • The install trip and the removal trip

The full range and what each option suits is on the security camera hire hub.

Best options for leasing construction security cameras in Queensland

The best option for leasing construction security cameras in Queensland depends on one thing: what power and internet the site has. No power and no internet takes a self-contained solar camera on 4G. A live temporary power pole takes a mains-powered 4G camera. An established site office with reliable Wi-Fi can take a Wi-Fi camera.

In practice most Queensland builds start on the first option and move to the second. A camera on a security camera on a power pole is about $69 a week excluding GST, and a standalone security camera pole for a site with no pole is about $100 a week. Both run on a 12 week minimum hire.

What security is needed on a construction site?

A Queensland construction site needs perimeter fencing, controlled access, lighting and monitoring of the areas where tools, copper and plant are stored. Security cameras cover the monitoring part, and on most residential and small commercial builds they replace a guard entirely, because the theft window is overnight and a camera works every night without a roster.

Fencing and access control come first, because a camera records a theft it cannot prevent. Lighting matters more than people expect: a lit site is a less attractive target and it gives the camera usable footage. Our construction site security camera hire guide covers how the pieces fit together.

Construction site cameras Queensland: where we deliver

Poles and Holes delivers construction site cameras across South East Queensland from our Capalaba depot. Brisbane, Logan, Redlands, Ipswich and Moreton Bay sit inside the standard 40km delivery zone at the flat delivery rate. Gold Coast, Sunshine Coast and Toowoomba jobs are covered as extended-zone work, with travel charged at $10 per kilometre beyond 40km.

That covers the growth corridors where the builds actually are: Ripley, Springfield, Yarrabilba, Caboolture, Redland Bay and Coomera. Delivery inside the standard zone is $390 excluding GST. We run to the Gold Coast regularly, so coastal jobs are scheduled against those runs rather than treated as one-offs.

What drives the cost of a construction site security camera rental

Construction site camera hire is quoted per camera per week, and four things move it: camera count, hire duration, whether the camera runs on mains power or a self-contained solar unit, and whether the site sits inside our 40km standard delivery zone. Full-build hires price better per week than short jobs, and multi-camera sites price better per camera.

Where a pole is hired alongside the camera, a site pole is $600 for its 12 week minimum hire and 3-phase is $840, both excluding GST. Mounting the camera on a pole you are already hiring is the cheaper arrangement, because the camera runs on mains rather than needing its own panel and battery. If you need a pole anyway, book temporary power pole hire and the camera together.

How much do CCTV installers charge?

CCTV installers normally charge a separate call-out and installation fee on top of hardware. On a hire, there is no separate installer charge: our crew delivers, mounts and commissions the camera as part of the hire, and comes back to remove it at the end. The install and removal trips are quoted with the hire, not billed afterwards.

That is the single most common reason a hire quote and a purchase quote are not comparable. If you are weighing up hardware to buy, our rundown of the best security cameras for construction sites walks through what to check.

Construction site security camera hire FAQs

The questions builders and project managers ask us most often before booking.

Is it better to lease or buy construction site security cameras?
For most Queensland builders it is better to hire construction site security cameras than to buy them, and the reason is utilisation rather than price. A camera you buy has to be installed, connected, stored between jobs, maintained, and replaced when a unit gets knocked off a post by a bobcat. It earns nothing in the gaps between builds and the hardware dates quickly. A hire converts all of that into a weekly rate per camera, about $69 a week excluding GST for a pole mounted unit, with the mount, power, connectivity, install trip and removal trip included. It also flexes with the job: three cameras during the frame stage, one during fitout, none once the site is locked up. Buying starts to make sense if you run permanent yards or depots where the same camera watches the same fence line every night for years.
How much should I pay for CCTV installation?
On a hire you should not be paying a separate CCTV installation fee at all. Installation on a construction site camera hire from Poles and Holes is part of the hire: our crew delivers the camera, mounts it on the fence, a standalone pole or an existing power pole, commissions it, checks the mobile signal at that address, and returns to remove it when the job finishes. Both trips are quoted with the hire rather than billed as extras afterwards. What does sit outside the flat rate is delivery, at $390 excluding GST inside our standard 40km zone, and travel at $10 per kilometre beyond it. Where a separate installation charge legitimately applies is on a purchased system, because you are then paying a contractor for labour on hardware you own. Ask any hire supplier to confirm install is included before you compare rates.
Can my boss watch me on camera all day?
Site security cameras on a Queensland construction site are there to watch the site outside working hours, not to watch individual workers all day. In practice, cameras are pointed at the things that get stolen: material stacks, tool stores, plant, copper and the site entry. They are signposted at the gate, and the notification expectations that apply to recording in a workplace are the reason the signage goes up. Continuous surveillance of workers for performance monitoring is a different exercise with different obligations, and it is not what a construction hire camera is set up to do. If you are the builder, the practical guidance is to point the cameras at the perimeter and the storage areas, signpost the site, and tell your crew what is recorded and why. Being straight about it up front avoids most of the friction.
How quickly can cameras go up on a Brisbane construction site?
For a Brisbane construction site inside our standard 40km delivery zone, cameras normally go up within one to two business days of the quote being accepted, and same day is often possible if the request lands early. The camera arrives configured, so the site visit is a mount and commission rather than a build. What slows a job down is not the camera, it is the unknowns: an address we have not checked for mobile signal, a mounting point that has not been decided, or a site with no safe access at the time of the visit. Give us the site address, the number of cameras and where you want them looking, and we can usually confirm the install window on the same call. Gold Coast, Sunshine Coast and Toowoomba jobs sit outside the 40km zone and are scheduled against our runs, so allow a little more notice.
What happens if a camera is damaged or stolen on site?
Tell us straight away and we will get a replacement unit on the site. Damage happens on live construction sites, and a camera mounted near a working machine will occasionally cop a knock, which is why hire cameras are specified for site conditions rather than for a suburban driveway. How the damage is treated depends on the cause: fair wear and tear during normal hire is our problem to fix, while a unit destroyed by machinery, deliberately damaged or stolen from the site sits with the hirer under the hire terms, which are set out in the agreement before the camera goes out. The practical steps that reduce both risks are mounting high, mounting on a standalone pole or an existing power pole rather than a loose fence panel, and signposting the site so it reads as monitored.
$828.24min. hire

ex GST

+ from $390.00 delivery

Total from · incl. standard delivery$1,218.24
Minimum hire period84 days
Daily rate$9.86/day

This is the price for the minimum hire period. Extensions beyond 84 days are billed monthly in arrears.

What's Included
  • Camera and weatherproof housing
  • Mounting hardware
  • 4G SIM and data included
  • Mobile app access (iOS/Android)
  • Delivery and installation
  • Removal at end of hire
  • Swap-out if a unit fails

Not sure which camera setup suits your site?

Our team can recommend the right camera setup based on your site size, duration, and security requirements.

Mon-Fri 7am-4pm
Maximum Security

For total coverage, run both setups

Our two camera setups are designed to work together. The pole-mounted camera is a low-cost way to watch the compound and entry once your power's on; the standalone solar pole gives you day-one coverage and a fixed gate camera plus a roaming PTZ for everywhere else.

Site Secure
Standalone solar pole
Add this
  • Two cameras — a fixed camera on your gate plus a roaming PTZ patrol
  • 100% solar and fully off-grid — no mains power, no Wi-Fi
  • Works from day one, before your site power is connected
View Site Secure
Site Watch
Camera on your power pole
  • A 4MP pan-tilt camera mounted high on your temporary power pole
  • Mains-powered from your meter box, with battery backup
  • Comes online when your pole is energised — the low-cost add-on
View Site Watch

The result: continuous coverage from day one through handover — a fixed camera locked on your gate, PTZ cameras patrolling, and no blind spots.

Get a Free Quote

Related Articles

Tips and guides for your next project.

Ready to secure your build?

Send the site address and how many cameras you need and we will quote it, including the delivery figure so there are no surprises later.