Working at height, moving or falling objects, and electricity are three examples of hazards found on construction sites. They are not a ranking of the most common causes of injury, and they do not cover every risk on a particular job.
Assess the work before it starts and review controls as the site changes. The people managing the work must consider the actual tasks, workers and surrounding conditions.
1. Working at height
Roofs, ladders, scaffolds and unprotected openings can expose workers to falls. A short fall can still cause serious injury, especially where there are sharp objects or other hazards below.
First consider whether the task can be done from the ground or a suitable solid surface. Where work at height remains necessary, select controls for the task, such as protected platforms or edge protection. Training and personal protective equipment do not replace suitable physical controls.
Use WorkSafe Queensland's work-at-heights guidance to check the requirements for the work, including safe work method statements where applicable.
2. Moving and falling objects
Cranes, forklifts and delivery vehicles can bring moving loads close to people on foot. Loose tools or materials stored above other workers can also fall.
Plan vehicle and pedestrian routes before deliveries arrive. Control access beneath lifting and overhead work, secure materials and communicate changes to the work area. Choose protective equipment for the remaining risks after the other controls are in place.
The construction work model code of practice provides practical examples. Check the requirements that apply in Queensland with the responsible site team.
3. Electrical hazards
Damaged tools, temporary wiring and work near overhead or underground electricity lines can cause electric shock or fire. Identify the services and arrange suitable controls before excavation, lifting or other work nearby.
Electrical work must be done by appropriately licensed people. Keep damaged equipment out of use and have inspection, testing and maintenance arrangements for site equipment. Awareness and protective gear alone are not a sufficient electrical-safety plan.
WorkSafe Queensland's construction electrical-safety guidance explains the responsibilities and risk controls. For equipment supply and connection stages, see our Energex connection process guide.
Stay safe on site
Have the responsible site team assess all the hazards for the job and communicate the controls to workers and contractors. Check that those controls still work when access, equipment or the work itself changes. Keep emergency arrangements understood and available.
If you need a temporary supply point, compare our temporary power pole hire options and send the site details for a quote. Hiring equipment is one part of site preparation; it does not replace the site's safety assessment.

About the author
Doug, Owner & Director
Doug and Deb purchased Poles and Holes in 2002 as its third owners. Doug is the owner and director of the Capalaba business, which was established in 1960 and supplies temporary power poles, portable toilets and site security cameras.



